MySQL InnoDB Cluster Charm deploys and manages the lifecycle of a
MySQL InnoDB Cluster.
This charm provides a MySQL 8 InnoDB clustered database.
Ubuntu 19.10 or above is required.
The charm is intended for deploying a cluster and therefore does not deploy on a single unit.
juju deploy -n 3 mysql-innodb-cluster
juju add-relation mysql-innodb-cluster:db-router msyql-router:db-router
The charm can be related to existing charms that use the shared-db relation.
However, this relation should be considered deprecated:
juju add-relation mysql-innodb-cluster:shared-db keystone:shared-db
Scale out Usage
Nodes can be added to the cluster as Read Only nodes:
juju add-unit mysql-innodb-cluster
Known Limitations and Issues
Warning: This charm is in preview state.
The charm is under active development and is not yet production ready. Its
current intended use is for validation of MySQL 8 InnoDB cluster for use with
The name of the cluster can be customized at deploy time:
juju deploy -n 3 mysql-innodb-cluster --config cluster-name myCluster
OpenStack Charmers email@example.com
Please report bugs on Launchpad.
For general questions please refer to the OpenStack Charm Guide.
- (boolean) If True enables openstack upgrades for this charm via juju actions. You will still need to set openstack-origin to the new repository but instead of an upgrade running automatically across all units, it will wait for you to execute the openstack-upgrade action for this charm on each unit. If False it will revert to existing behavior of upgrading all units on config change.
- (string) The number of tries instances make to rejoin the cluster after being expelled.
- (int) Sets the expire_logs_days mysql configuration option, which will make mysql server automatically remove logs older than configured number of days.
- (string) Sets the max_binlog_size mysql configuration option, which will limit the size of the binary log files. The server will automatically rotate binlogs after they grow to be bigger than this value. Keep in mind that transactions are never split between binary logs, so therefore binary logs might get larger than configured value.
- (string) Location on the filesystem where binlogs are going to be placed. Default mimics what mysql-common package would do for mysql. Make sure you do not put binlogs inside mysql datadir (/var/lib/mysql/)!
- (string) Cluster name for the InnoDB cluster. Must be unique.
- (boolean) Turns on MySQL binary logs. The placement of the logs is controlled with the binlogs_path config option.
- (string) By default this value will be set according to 50% of system total memory or 512MB (whichever is lowest) but also can be set to any specific value for the system. Supported suffixes include K/M/G/T. If suffixed with %, one will get that percentage of system total memory allocated.
- (string) Configure whether InnoDB performs change buffering, an optimization that delays write operations to secondary indexes so that the I/O operations can be performed sequentially. . Permitted values include . none Do not buffer any operations. inserts Buffer insert operations. deletes Buffer delete marking operations; strictly speaking, the writes that mark index records for later deletion during a purge operation. changes Buffer inserts and delete-marking operations. purges Buffer the physical deletion operations that happen in the background. all The default. Buffer inserts, delete-marking operations, and purges. . For more details https://dev.mysql.com/doc/refman/8.0/en/innodb-parameters.html#sysvar_innodb_change_bufferring
- (boolean) Turns on innodb_file_per_table option, which will make MySQL put each InnoDB table into separate .idb file. Existing InnoDB tables will remain in ibdata1 file - full dump/import is needed to get rid of large ibdata1 file
- (int) Configure the InnoDB IO capacity which sets an upper limit on I/O activity performed by InnoDB background tasks, such as flushing pages from the buffer pool and merging data from the change buffer. . This value typically defaults to 200 but can be increased on systems with fast bus-attached SSD based storage to help the server handle the background maintenance work associated with a high rate of row changes. . Alternatively it can be decreased to a minimum of 100 on systems with low speed 5400 or 7200 rpm spindles, to reduce the proportion of IO operations being used for background maintenance work. . For more details https://dev.mysql.com/doc/refman/8.0/en/innodb-parameters.html#sysvar_innodb_io_capacity
- (int) Maximum connections to allow. A value of -1 means use the server's compiled-in default. This is not typically that useful so the charm will configure PXC with a default max-connections value of 600. Note: Connections take up memory resources. Either at startup time with performance-schema=True or during run time with performance-schema=False. This value is a balance between connection exhaustion and memory exhaustion. . Consult a MySQL memory calculator like http://www.mysqlcalculator.com/ to understand memory resources consumed by connections. See also performance-schema.
- (boolean) If True enables IPv6 support. The charm will expect network interfaces to be configured with an IPv6 address. If set to False (default) IPv4 is expected. . NOTE: these charms do not currently support IPv6 privacy extension. In order for this charm to function correctly, the privacy extension must be disabled and a non-temporary address must be configured/available on your network interface.
- (string) DEPRECATED. Use snap-http-proxy and snap-https-proxy model configuration settings. HTTP/HTTPS web proxy for Snappy to use when accessing the snap store.
- (string) DEPRECATED. Use snap-store-proxy model configuration setting. The address of a Snap Store Proxy to use for snaps e.g. http://snap-proxy.example.com
- (string) How often snapd handles updates for installed snaps. The default (an empty string) is 4x per day. Set to "max" to check once per month based on the charm deployment date. You may also set a custom string as described in the 'refresh.timer' section here: https://forum.snapcraft.io/t/system-options/87
- (string) Repository from which to install. May be one of the following: distro (default), ppa:somecustom/ppa, a deb url sources entry, or a supported Ubuntu Cloud Archive e.g. . cloud:<series>-<openstack-release> cloud:<series>-<openstack-release>/updates cloud:<series>-<openstack-release>/staging cloud:<series>-<openstack-release>/proposed . See https://wiki.ubuntu.com/OpenStack/CloudArchive for info on which cloud archives are available and supported.
- (string) TLS CA to use to communicate with other components in a deployment. . __NOTE__: This configuration option will take precedence over any certificates received over the ``certificates`` relation.
- (string) TLS certificate to install and use for any listening services. . __NOTE__: This configuration option will take precedence over any certificates received over the ``certificates`` relation.
- (string) TLS key to use with certificate specified as ``ssl_cert``. . __NOTE__: This configuration option will take precedence over any certificates received over the ``certificates`` relation.
- (int) Sets table_open_cache (formerly known as table_cache) to mysql.
- (string) Valid values are 'safest', 'fast', and 'unsafe'. If set to 'safest', all settings are tuned to have maximum safety at the cost of performance. 'fast' will turn off most controls, but may lose data on crashes. 'unsafe' will turn off all protections but this may be OK in clustered deployments.
- (boolean) Setting this to True will allow supporting services to log to syslog.