quantum gateway #30

Supports: precise

Add to new model

Description

This charm has reached end-of-life. Please use the neutron-gateway charm.

Neutron is a virtual network service for Openstack, and a part of
Netstack. Just like OpenStack Nova provides an API to dynamically
request and configure virtual servers, Neutron provides an API to
dynamically request and configure virtual networks. These networks
connect "interfaces" from other OpenStack services (e.g., virtual NICs
from Nova VMs). The Neutron API supports extensions to provide
advanced network capabilities (e.g., QoS, ACLs, network monitoring,
etc.)
. This charm provides central Neutron networking services as part
of a Neutron based Openstack deployment


Overview

This charm has reached end-of-life. Please use the neutron-gateway charm
instead.

To switch a deployed environment to the new charm, issue:

juju upgrade-charm --switch cs:trusty/neutron-gateway quantum-gateway

Then, after the charm has successfully completed the upgrade, issue:

juju run --service quantum-gateway "status-set active"

Configuration

bridge-mappings
(string) Space-separated list of ML2 data bridge mappings with format <provider>:<bridge>.
physnet1:br-data
data-port
(string) Space-delimited list of bridge:port mappings. Ports will be added to their corresponding bridge. The bridges will allow usage of flat or VLAN network types with Neutron and should match this defined in bridge-mappings.
database
(string) Database name
nova
database-user
(string) Username for database access
nova
debug
(boolean) Enable debug logging
enable-l3-agent
(boolean) Optional configuration to support use of linux router Note that this is used only for Cisco n1kv plugin.
True
ext-port
(string) Space-delimited list of external ports to use for routing of instance traffic to the external public network. Valid values are either MAC addresses (in which case only MAC addresses for interfaces without an IP address already assigned will be used), or interfaces (eth0)
external-network-id
(string) Optional configuration to set the external-network-id. Only needed when configuring multiple external networks and should be used in conjunction with run-internal-router.
flat-network-providers
(string) Space-delimited list of Neutron flat network providers.
ha-bindiface
(string) Default network interface on which HA cluster will bind to communicate with the other members of the HA Cluster.
eth0
ha-legacy-mode
(boolean) If True will enable Pacemaker to monitor the neutron-ha-monitor daemon on every neutron-gateway unit, which detects neutron agents status and reschedule resources hosting on failed agents, detects local errors and release resources when network is unreachable or do neccessary recover tasks. This feature targets to < Juno which doesn't natively support HA in Neutron itself.
ha-mcastport
(int) Default multicast port number that will be used to communicate between HA Cluster nodes.
5409
instance-mtu
(int) Configure DHCP services to provide MTU configuration to instances within the cloud. This is useful in deployments where its not possible to increase MTU on switches and physical servers to accomodate the packet overhead of using GRE tunnels.
nagios_context
(string) Used by the nrpe-external-master subordinate charm. A string that will be prepended to instance name to set the host name in nagios. So for instance the hostname would be something like: juju-myservice-0 If you're running multiple environments with the same services in them this allows you to differentiate between them.
juju
nagios_servicegroups
(string) A comma-separated list of nagios servicegroups. If left empty, the nagios_context will be used as the servicegroup
nova-rabbit-user
(string) RabbitMQ Nova user
nova
nova-rabbit-vhost
(string) RabbitMQ Nova Virtual Host
openstack
openstack-origin
(string) Optional configuration to support use of additional sources such as: . - ppa:myteam/ppa - cloud:precise-folsom/proposed - cloud:precise-folsom - deb http://my.archive.com/ubuntu main|KEYID . Note that quantum/neutron is only supported >= Folsom. Note that when openstack-origin-git is specified, openstack specific packages will be installed from source rather than from the openstack-origin repository.
distro
openstack-origin-git
(string) Specifies a YAML-formatted dictionary listing the git repositories and branches from which to install OpenStack and its dependencies. Note that the installed config files will be determined based on the OpenStack release of the openstack-origin option. For more details see README.md.
os-data-network
(string) The IP address and netmask of the OpenStack Data network (e.g., 192.168.0.0/24) . This network will be used for tenant network traffic in overlay networks.
plugin
(string) Network configuration plugin to use for quantum. Supported values include: . ovs - OpenVSwitch nvp|nsx - Nicira NVP/VMware NSX n1kv - Cisco N1kv
ovs
rabbit-user
(string) RabbitMQ user
neutron
rabbit-vhost
(string) RabbitMQ Virtual Host
openstack
run-internal-router
(string) Optional configuration to support how the L3 agent option handle_internal_only_routers is configured. all => Set to be true everywhere none => Set to be false everywhere leader => Set to be true on one node (the leader) and false everywhere else. Use leader and none when configuring multiple floating pools
all
sysctl
(string) YAML-formatted associative array of sysctl key/value pairs to be set persistently e.g. '{ kernel.pid_max : 4194303 }'.
use-syslog
(boolean) If set to True, supporting services will log to syslog.
verbose
(boolean) Enable verbose logging
vlan-ranges
(string) Space-delimited list of Neutron network-provider & vlan-id-ranges using format "<provider>:<start>:<end> ...".
physnet1:1000:2000