OpenVPN Access Server is a full featured SSL VPN software solution that integrates OpenVPN server capabilities, enterprise management capabilities, simplified OpenVPN Connect UI, and OpenVPN Client software packages that accommodate Windows, MAC, and Linux OS environments. OpenVPN Access Server supports a wide range of configurations, including secure and granular remote access to internal network and/ or private cloud network resources and applications with fine-grained access control.
- cache-proxy ›
This charm provides OpenVPN Access Server. Below is a
description taken from the main project site:
OpenVPN Access Server is a full featured SSL VPN software solution that
integrates OpenVPN server capabilities, enterprise management capabilities,
simplified OpenVPN Connect UI, and OpenVPN Client software packages that
accommodate Windows, MAC, and Linux OS environments. OpenVPN Access Server
supports a wide range of configurations, including secure and granular remote
access to internal network and/ or private cloud network resources and
applications with fine-grained access control.
To deploy the charm, you will first need a bootstrapped Juju environment and,
at a minimum, capacity for one additional machine.
Deploy openvpn-as to a bootstrapped environment:
juju deploy openvpn-as
It is recommended that you change the default password for the instance:
juju set openvpn-as password=newpassword
Finally, expose the service:
juju expose openvpn-as
You can then browse to https://ip-address-or-fqdn/admin to configure
OpenVPN-AS. The username and password by default are 'openvpn/openvpn-as'. If
you set the password as recommended above, then use that password instead of
Connecting to the VPN
The easiest way to establish a connection to the VPN is to authenticate via
the login page at https://ip-address-or-fqdn. This will give access to client
packages and config files needed for client connections.
Basic Linux Client Usage
To connect to the VPN using a Linux distribution, the openvpn package is
required on the client. Then you may login to the OpenVPN-AS web client and
download a configuration for your user. Run the OpenVPN client with the
downloaded configuration and you should see a connection established. Below
are the common steps to install an use the OpenVPN client with the downloaded
config file 'client.ovpn':
sudo apt-get install openvpn sudo openvpn --config client.ovpn
Basic Windows and Mac Usage
To connect to the VPN with a Windows or Mac OS, a client executable is
available from the web portal once successfully authenticated. Clients will be
prompted to download the client and continue.
Advanced Linux Client Usage with NetworkManager
To import a VPN configuration into NetworkManager, the NetworkManager OpenVPN
package must be installed and the client keys and certficates as well as CA
certificate must be extracted from the OpenVPN-AS server. In order to do this,
you must know the machine number running the OpenVPN-AS service. For this
example, we will assume the machine number is "1" and the client is 'johndoe'.
juju ssh 1 mkdir /tmp/johndoe_client sudo /usr/local/openvpn_as/scripts/sacli -a johndoe \ -o /tmp/johndoe_client/ --cn johndoe get5 cd /tmp && tar -czf /home/ubuntu/johndoe-openvpn.tgz \ johndoe_client/ rm -Rf johndoe_client exit
This process uses the OpenVPN-AS script to get the user certificate, key,
client config file, CA certificate and TLS key then creates a tarball in the
default user's home directory. Now copy the certificate to your computer for
redistribution and delete the original file:
juju scp 1:~/johndoe-openvpn.tgz . juju ssh 1 "sudo rm johndoe_client.tgz && exit"
For instructions on how to import the downloaded files into NetworkManager,
reference the following article: http://bit.ly/15dVReF
There are a number of configuration options available via the charm. Most of
the options, however, can be modified using the OpenVPN-AS Admin UI, but are
provided in the charm as a means of convenience and rapid deployment.
By default, the username is 'openvpn' and PAM is used as the authentication
backend. These options can be changed via the OpenVPN-AS Admin UI and are left
at their default settings in order to ensure a low barrier to deployment.
OpenVPN defaults to this username, and this username can be disabled if desired.
The FQDN of the service will default to the public address of the machine it is
deployed on. The FQDN is referenced in the client configuration downloaded by
clients connecting to the VPN. The VPN will not be able to establish a successful
connection until the FQDN correctly resolves to the OpenVPN-AS service.
juju set openvpn-as fqdn=example.site.com
This option sets the password on the service for the 'openvpn' admin user.
juju set openvpn-as password=newpassword
The port configuration option determines the port used to manage, log in, and
connect to the service. When the port is changed, any prior downloaded
configurations will need to be reconfigured for each client previously using
juju set openvpn-as port=8443
The client network option configures the network used when assigning VPN
clients addresses. If you're home or corporate network use the same range as
the default, then you may consider changing it to an alternate network range. A
CIDR value is required or a '/24' CIDR will be assigned to the network given.
juju set openvpn-as client-network=10.11.12.0/23
By default all client traffic will be routed through the VPN tunnel. To
disallow clients from sending all traffic through the VPN tunnel, set this
value to 'False'. This will only allow clients to access remote subnets located
behind the subnet. A list of networks to be routed through the VPN can be
configured through the Admin UI.
juju set openvpn-as reroute-gateway=False
By default all DNS queries will be routed through the VPN tunnel. To disable
this, set the following option to False.
juju set openvpn-as reroute-dns=False
In order to use more than the default 2 concurrent client sessions, a valid
license will be needed from
https://openvpn.net/index.php/access-server/license-key.html. Once a license
has been acquired, you can install it via this option.
juju set openvpn-as license=XXXXXXXXXXXXX
Author: NextRevision email@example.com
Report bugs at: http://bugs.launchpad.net/charms/+source/openvpn-as
- (string) network to use for client addressing; must include a cidr suffix, i.e. X.X.X.X/XX
- (string) FQDN of the server, defaults to unit's private address
- (string) optional license key acquired from openvpn.net to allow for greater than two clients; see https://openvpn.net/index.php/access-server/license-key.html for more details
- (string) password for the admin user 'openvpn'
- (int) port to run the web UI over (includes admin UI)
- (boolean) reroutes all DNS traffic through the established VPN tunnel
- (boolean) reroutes all client traffic through the established VPN tunnel